Equipped with its new IGBT rectifier Smart FC series keeps your critical loads protected while its space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR).
Parallel configuration up to 8 units per redundancy (N+1) and power increase. Loop connection helps the UPS system to continue the operation when the connection cable is interrupted.
IGBT based power factor correction technology provides input power factor close to 1 (≥ 0,99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.
Different IP protection degrees available. Different voltage options with input & output transformers. 3/1 Phase version is available for 10-30kVA power ratings.
Equipped with its new IGBT rectifier PWM technology , and fully EU components, EnSmart ‘s Smart FC frequency converter is designed to convert 50Hz or 60Hz mains frequency to 50Hz ot 60Hz power supply for critical industrial loads. Its solid-state space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR).
Thanks to the wide variety of IP protection degree options Smart FC series presents maximum flexibility advantage to users and optimizes total cost of ownership. It is ideal solution for industrial applications with its wide range of voltage options 110V, 120V, 208V, 220V, 230V, 240V, 380V, 400V, 440V, 480V, 690V.
Ensmart Power ‘s wide range of frequency converter systems include single phase and three phase solid state modular and stand alone static frequency converters up to 40MW with the models available in power capacities 10kVA,20kVA,30kVA,40kVA,60kVA,80kVA,
100kVA,120kVA,160kVA, 200kVA, 250kVA, 300kVA, 400kVA, 500kVA, 600kVA, 800kVA,1000kVA
Choose Ensmart Power frequency converter , run a European made or UK made equipment / machinery in the United States or run a US equipment / machinery in the UK or Europe converting three phase 220V 60 Hz to 380V/400V/440V/480V 50 Hz in one step by built-in step up transformer for industrial machines.
If you are a manufacturing facility in US with a Made in Europe or Made in UK machinery or if you are a factory in Europe or UK with a Made in US machinery or equipments our frequency converters will bring flexibility and efficiency to your business. See our advanced frequency converter features below:
IGBT PWM Rectifier & Inverter
DSP Control
Low Input Current THD (<3%)
Fully EU Components
High Input Power Factor (>0.99)
Compact and light design with SMD technology
Low Input Current THD (<3%)
High Input Power Factor (>0.99)
Short Circuit and Overload Protection
Parallel Ready
Power Walk-in for Progressive Rectifier Start-up when the Mains is Restored.
1500 Real Time Event Log with Detailed Parameters
Static & Manual Bypass
User Friendly Multilingual 320×240 Graphic Display
Monitoring and Shutdown Software
Compliant with IEC EN62040
ISO9001, ISO14001 compilant production
RS232 Serial and RS485 Ports
2 Communication Slots ModBUS RTU / ModBUS TCP (Optional)
Remote Emergency Power Off
Remote Display Panel
Dry Contact ,SNMP, ProfiBUS (Optional)
We stand out by combining decades of engineering excellence with forward-thinking, modular technology. Here is why industry leaders trust us.
Our unique approach to battery storage and frequency converters sets industry standards.
With 40+ years of experience glabally, we bring unparalleled knowledge and skill to every project.
From initial consultation and installation to comprehensive, round-the-clock support services.
Our solutions are trusted internationally, shaping a sustainable global energy future.
Explore the typical application areas of our frequency converters and find out how you can use Ensmart Power frequency converters to make your investment more efficient.
Shore-to-ship power for the berthed ships to enable maintenance providing stable voltage and frequency.
Enabling yachts to operate in any marina worldwide, regardless of the local power grid's voltage or frequency standards
Cold ironing, seamless power transfer from the vessel's generators to the shore grid and back
Energy efficiency, reduce mechanical wear, enable precise automation, adapt equipment to different power (50Hz/60Hz)
Vessels can shut down their generators, reduce fuel consumption, lower costs, and fewer emissions in urban environments.
Convert standard airport grid power (50/60Hz) into the 115V AC, 400Hz standard required by aircraft electronics
A comprehensive range of static frequency converter solutions designed to deliver precise and reliable power conversion for commercial, industrial, marine, aviation, and mission-critical applications. From compact units to high-capacity systems, our converters provide exceptional efficiency, power quality, and scalability for future growth.
400Hz Frequency Converter
EnSmart 400Hz Smart FC400 Series frequency converter specially designed for the control and lighting systems of military airports and aircrafts. To complete the airfield range of products , to be installed in a maintenance hangar or on the apron of an airport Smart FC400 is available with a secondary output 28VDC and 270VDC power supplies. 400Hz is a type of frequency within AC electrical power, which is the standard for weapon systems, aerospace and aircraft industries across the world. Airports, hangars and aircraft ships must have access to a 400Hz frequency converter as this is not a standard power.
Marine Shore Power Converter
EnSmart Power ShoreMaster-BS Series On-Board Frequency Converters provide maximum protection for all sensitive on-Board marine equipments in yachts, boats, cruises , vessels and enables them to have worldwide connectivity. ShoreMaster-BS can be installed on board and used to power on-board equipment with supply requirements different from those found on the ship’s AC distribution. They are built to fit in the limited spaces of super, mega and giga yachts, providing highly reliable power at different voltages and frequencies
TurnKey Shore-To-Ship Shore Power Solution
The ShoreMaster is Ensmart Power’s fully integrated dock / port side shore-to-ship power supply solution designed to help to reduce emissions in ports, by enabling them to shut down their diesel generators and connecting to the port’s electricity grid via a shore-to-ship power connection while berthed. Plug-in-Play Containerized IP65 Shore Power for ports and ships. State-of-the-art IGBT technology with DSP control. Scalable from a hundred kWs to 50 MW tailored to port traffic needs. Equipped and pre-assembled with high quality power components Support LV 400V,690V or Medium Voltage 6kV, 11kV distribution
Modular Bi-Directional Shore Power Converter
The Smart MODULE FC100 is highly configurable modular static frequency converter constructed using power modules for best redundancy. 100kVA Power modules operate as rectifiers to source sinusoidal current from the supply, and inverters to reproduce the AC waveforms on the output . For operation of the power modules an isolation transformer is applied to the input or output the as part of the Smart MODULE FC100 system. Typical FC100 Applications are Interconnection of ships at berth to the grid (Shore-to-ship ),On-board vessels (shore power converter) and special industrial applications such as floating platform storage and offloading operations for the oil and gas industry
Frequency Converter 50Hz 60Hz
Equipped with its new IGBT rectifier Smart FC –RM frequency converter is designed for manufacturing and aerospace. With its rack-mounted design, Smart-FC-RM series provide precise frequency conversion while its space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR). Smart FC-RM series presents maximum flexibility with its 3 /3 Phase 3/1 Phase 1/1 Phase models in various IP Enclosure options.
Complete this short form. We’ll connect you with one of our expert team members to discuss energy storage/charging options for your Home or Business
Or you can directly rich out on below contact details
