Online UPS 1:1 Phase

Smart Pack RT 1-3kVA

True Double Conversion Online Technology

Sine wave output and clean energy for computers and all sensitive equipments. Online UPS protects your equipments from all mains problems. Online UPS can operate with a wide voltage range so that battery power does not need to be used.

High Output Power Factor

Provides 25% more power at the output in comparison to standard 0.7 power factor UPS systems and supports more sensitive equipments.

Smart Pack RT
1-3 kVA

Online UPS 1:1 Phase​​

EnSmart Power’s SmartPack RT on-line double conversion Rack and Tower convertible UPS provides high density single phase power protection for small to medium sized IT rooms , critical servers, storage and IT networks, telecommunications and medical labs , protecting critical equipments from voltage or frequency fluctuations, surges, brownouts, and blackouts. It is a great choice for the IT managers who are looking for energy efficient and advanced power protection solution with highest unity power factor (VA=W).  The PF 1 feature provides 10% more power than other UPSs and can support a larger number of servers than the UPS’s with lower PF.

Packed with industry-leading
Smart Features

Smart LV UPS with IGBT based power factor correction technology provides input power factor close to 1 (≥ 0,99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.

High Efficiency & Low Total Cost of Ownership

Less energy consumption to supply the loads thanks to high efficiency up to 96%.
Reduced energy loss.
Reduced electricity usage and air conditioning requirements.
Reduction in operating cost of UPS.
Low input current total harmonic distortion (THDi) less than 3% helps to avoid the disturbance and expensive harmonic filters.
Small footprint and easy maintenance.

High Output Power Factor 1

Output power factor of 1 (kVA=kW) rate provides up to 25% more active power than a traditional UPS.
Suitable for modern power supply application with unit or capacitive power factor (e.g. new servers generation).
No reduction in active power from 0,9 leading to 0,9 lagging.

Maximum Availability

Parallel configuration up to 8 units per redundancy (N+1) and power increase.
Loop connection helps the UPS system to continue the operation when the connection cable is inturrupted.

  • Dual Input
  • Common Battery
  • Backfeed Protection
  • Cold Start (Optional)
  • Advanced Battery Management
  • Short Circuit and Overload Protection
  • Parallel Ready
  • Redundant Power Supply
  • Power Walk-in for Progressive Rectifier Start-up when the
  • Mains is Restored
  • Battery Temperature Sensor
  • Static and Manual Bypass Operation
Loading technical specifications...
MODEL Smart Pack RT 1 kVA
Capacity 1kVA / 900W 
INPUT
Nominal Voltage 200/208/220/230/240 VAC or 100/110/115/120/127 VAC 
Voltage Range 55 ~ 150 VAC or 110 ~ 300 VAC @ 60% load, 80 ~ 145 VAC or 160 ~ 300 VAC @ 100% load 
Frequency Range 45 ~ 55 Hz / 55 ~ 65 Hz (Auto-Detect) 
Power Factor >0.99 @ Nominal Voltage (100% load) 
OUTPUT
Voltage Range 200/208/220/230/240 VAC or 100/110/115/120/127 VAC 
Power Factor 0.9 
Voltage Regulation ±1% 
Frequency Range (Synchronized) 45 ~ 55 Hz / 56 ~ 64 Hz 
Frequency Range (Batt. Mode) 50 Hz / 60 Hz ±0.1 Hz 
Current Crest Ratio 3:1 
Harmonic Distortion ≤3% THD (Linear Load); ≤6% THD (Non-Linear Load) 
Transfer Time AC to DC: Zero; Inverter to Bypass: 4ms (Typical) 
Waveform Pure Sinewave 
EFFICIENCY
AC Mode 88% 
Battery Mode 83% 
BATTERIES
Standard Model - 
Battery Type 12V / 9Ah 
Numbers 2 / 3 
Backup Time Estimated Remaining Time Displayed on the LCD 
Typical Recharging Time 4 hours Recover to 90% Capacity 
Charging Current (Max) 1.0 A 
Charging Voltage 27.4 VDC ±1% / 41.1 VDC ±1% 
Long Run Model (Only HV Models) - 
Battery Numbers Depending on teh Capacity of External Batteries 
Charging Current (Max) 6 A / 12 A (Double Board) 
Charging Voltage 27.4 VDC ±1% / 41.1 VDC ±1% 
INDICATORS
LCD Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode and Fault Indicators 
ALARMS
Battery Mode Sounding Every 4sec 
Low Battery Sounding Every 1sec 
Overload Sounding Twice Every 1sec 
UPS Fault Continously Sounding 
ENVIRONMENTAL
Humidity 20 ~ 90% RH @ 0 ~ 40ºC (Non-Condensing) 
Noise Level ≤50 dB (1m) 
COMMUNICATION
Smart RS232 / USB Supports Windows®2000/2003/XP/Vista/2008/Windows®7/8/10, Linux, Free BSD and Mac 
SNMP (Optional) Power Management from SNMP Manager and Web Browser 
DIMENSIONS &WEIGHT
Standard Model - 
Dimensions WxDxH (mm) 430x440x86,5 mm
Net Weight (kg) 13.9 / 16.4 kg
Long Run Model (Only HV Models) - 
Dimensions WxDxH (mm) 430x440x86,5 mm
Net Weight (kg) 8.2 kg

EnSmart Power’s SmartPack RT Online UPS is a high-density, single-phase, double-conversion UPS designed for both rack-mounted and tower installations. It provides reliable power protection for small and medium-sized IT rooms, critical servers, data storage systems, IT networks, telecommunications infrastructure, medical laboratories, and other sensitive equipment.

The SmartPack RT Series protects critical equipment against voltage and frequency fluctuations, power surges, brownouts, and blackouts. With its unity output power factor (PF = 1, VA = W), it delivers up to 10% more active power than comparable UPS systems with a 0.9 output power factor, allowing more equipment to be supported within the same VA rating.

Flexible Rack and Tower Design

The plug-and-play SmartPack RT UPS features a compact, convertible rack and tower design compatible with standard 19-inch equipment cabinets.

Its cold start capability allows the UPS to operate directly from battery power when the mains supply is unavailable.

True sine wave output and zero transfer time provide continuous power protection for sensitive IT equipment, industrial machinery, laboratory instruments, and other critical applications.

Optional ECO Mode operation improves energy efficiency and helps reduce electricity consumption and heat generation.

Available Models and Installation Options

The SmartPack RT Series is available in the following power ratings:

  • SmartPack RT 1 kVA

  • SmartPack RT 2 kVA

  • SmartPack RT 3 kVA

Models up to 3 kVA feature a compact 2U rack design, while 6–10 kVA models use a 3U configuration.

Advanced Communication and Monitoring

All SmartPack RT UPS models include UPSilon UPS Management Software, available for free download and compatible with major operating systems.

Communication and monitoring capabilities include:

  • HID USB connectivity

  • Optional network management cards

  • DB9 serial communication port

  • Remote UPS monitoring and control

  • Automatic unattended system shutdown

  • Real-time monitoring of power parameters

Intelligent Battery Management

EnSmart Power’s Intelligent Battery Management (IBM) technology utilizes an advanced three-stage charging process to optimize battery performance and extend service life.

The system intelligently manages charging cycles, prevents overcharging, and continuously monitors battery conditions.

Key advantages include:

  • Battery service life extension of up to 40%.

  • Recharge times as short as 4 hours under specified conditions.

  • Support for up to 4 external battery extension packs.

  • Extended backup times of several hours, depending on load and battery configuration.

  • Hot-swappable batteries for uninterrupted operation during battery replacement.

  • Load segment control for prioritized shutdown of non-essential equipment.

  • Remote Emergency Power Off (EPO) functionality for additional operational safety.

Advanced LCD Display

The SmartPack RT Series features a versatile, programmable, multilingual LCD display that provides real-time information about UPS operation and system status.

The display includes:

  • Load Level

  • Battery Level

  • AC Mode

  • Battery Mode

  • Bypass Mode

  • Fault Indicators

Warranty

All SmartPack RT UPS units are supplied with a 2-year warranty.

General Features

  • High-Frequency Technology and True Double-Conversion

  • Microprocessor-Based Control Technology (CPU)

  • Input Power Factor Correction (PFC)

  • Wide Input Voltage Range (110–300 V)

  • Unity Output Power Factor (PF = 1)

  • Cold Start Capability

  • Automatic Frequency Detection

  • ECO Mode Operation for Energy Savings

  • Selectable Output Voltage via LCD

  • Configurable Output Bypass Settings via LCD

  • Power-On Self-Test Function

  • Advanced Battery Management (ABM)

  • Short Circuit and Overload Protection

  • Automatic Battery Charging in UPS Off Mode

  • Automatic Fan Speed Control Based on Load Conditions

  • Generator Compatibility

  • USB and RS232 Communication Ports

Trusted by businesses globally throughout a wide range of industries and applications.

6624e0_dd1aceaaa8d0467bafbed99b0076e3a6~mv2
6624e0_920be237212146c2805e85d4801cf156~mv2
6624e0_50aecf803c9e4190aa7b318b26f30118~mv2
6624e0_ade3684ae5e448d4ae78799efe09b1e0~mv2
6624e0_1f52c64bba224f74a6981ceff50c3c2a~mv2
ensmart-power-mobily-logo
ensmart-power-hapag-llyod-logo
ensmart-power-ge-oil-and-gas-logo
ensmart-power-aramco-logo
Ford
RoyalAir
Vard
6624e0_dd1aceaaa8d0467bafbed99b0076e3a6~mv2
6624e0_920be237212146c2805e85d4801cf156~mv2
6624e0_50aecf803c9e4190aa7b318b26f30118~mv2
6624e0_ade3684ae5e448d4ae78799efe09b1e0~mv2
6624e0_1f52c64bba224f74a6981ceff50c3c2a~mv2
ensmart-power-mobily-logo
ensmart-power-hapag-llyod-logo
ensmart-power-ge-oil-and-gas-logo
ensmart-power-aramco-logo
Ford
RoyalAir
Vard
Key Differentiators

Why Choose EnSmart

We stand out by combining decades of engineering excellence with forward-thinking, modular technology. Here is why industry leaders trust us.

Innovative Solutions

Our unique approach to battery storage and frequency converters sets industry standards.

Proven Expertise

With 40+ years of experience glabally, we bring unparalleled knowledge and skill to every project.

End-to-End Services

From initial consultation and installation to comprehensive, round-the-clock support services.

Global Impact

Our solutions are trusted internationally, shaping a sustainable global energy future.

Application Sectors For UPS Systems

With its expertise over 40 years of power protection, EnSmart Power offers a wide range of Line-interactive or Online, Single phase , Tower or Rack-mounted and Online Three phase UPS Power Supply systems with transformer or transformerless from 600VA up to 8MW.

Data Center & IT Room

Any power failure can have a devastating impact on mission-critical computers, communications and data, resulting in costly downtime. UPS System is a critical factor to take into account for reliability of today’s data centers.

Health Care & Building

Avoiding downtime is a top priority in Commercial buildings that systems are operating 24/7/365. Whether it is Hotels, Hospitals, Retail Supermarkets, Public Facilities, Power is crucial for ensuring a safe, healthy environment.

Manufacturing

Reliable power supply is crucial to ensure the continuous availability of power and safe operations for all types of manufacturing processes like consumer electronics, pharmaceutical, paper, printing, food & beverage, mining, automotive and etc

Related Products

A comprehensive range of static frequency converter solutions designed to deliver precise and reliable power conversion for commercial, industrial, marine, aviation, and mission-critical applications. From compact units to high-capacity systems, our converters provide exceptional efficiency, power quality, and scalability for future growth.

Smart Pack​

Online UPS 1:1 Phase​​

• Single Phase Power Protection For Entry Level IT Servers & Network
• True Double-Conversion Online Technology
• True Sine-wave Output provides clean energy

Smart Pack

Online UPS 1:1 Phase​​

• Single Phase Power Protection For Small and Medium Businesses
• True Double-Conversion Online Technology
• True Sine-wave Output provides clean energy

Smart Pack RT​​

Online UPS 1:1 Phase​​

• Rack and Tower Convertible UPS Suitable for rack cabinets
• True Double-Conversion Online Technology
• True Sine-wave Output provides clean energy

Connect
With Our Team

Complete this short form. We’ll connect you with one of our expert team members to discuss energy storage/charging options for your Home or Business

Or you can directly rich out on below contact details

Connect with our Team...