10 - 1000 kVA
Frequency Converter 50Hz 60Hz
Convert 50Hz to 60Hz and 60Hz to 50Hz
Equipped with its new IGBT rectifier PWM technology , and fully EU components EnSmart 's Smart FC frequency converter is designed to convert 50Hz or
60Hz mains frequency to 50Hz ot 60Hz power supply to industrial critical loads.
Its solid-state space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR).
Thanks to the wide variety of IP protection degree options Smart FC series presents maximum flexibility advantage to users and optimizes total cost of ownership.
It is ideal solution for industrial applications with its wide range of voltage options 110V, 120V, 208V, 220V, 230V, 240V, 380V, 400V, 440V, 480V, 690V.
IGBT PWM Rectifier & Inverter
DSP Control
Low Input Current THD (<3%)
Fully EU Components
High Input Power Factor (>0.99)
Compact and light design with SMD technology
Low Input Current THD (<3%)
High Input Power Factor (>0.99)
Short Circuit and Overload Protection
Parallel Ready
Power Walk-in for Progressive Rectifier Start-up when the Mains is Restored.
1500 Real Time Event Log with Detailed Parameters
Static & Manual Bypass
User Friendly Multilingual 320x240 Graphic Display
Monitoring and Shutdown Software
Compliant with IEC EN62040
ISO9001, ISO14001 compilant production
RS232 Serial and RS485 Ports
2 Communication Slots ModBUS RTU / ModBUS TCP (Optional)
Remote Emergency Power Off
Remote Display Panel
Dry Contact ,SNMP, ProfiBUS (Optional)
High Efficiency & Low Total Cost of Ownership
IGBT based power factor correction technology provides input power factor close to 1 (≥ 0,99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.
Low input current total harmonic distortion (THDi) less than 3% helps to avoid the disturbance and expensive harmonic filters.
Small footprint and easy maintenance.
High Input Power Factor
0,99 Input power factor ensures clean and sinusoidal input current.
The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost
Maximum Availability
Parallel configuration up to 8 units per redundancy (N+1) and power increase.
Loop connection helps the UPS system to continue the operation when the cnnection cable is inturrupted.
Standard Electrical Features
Backfeed Protection
Cold Start (Optional)
Advanced Battery Management
Short Circuit and Overload Protection
Parallel Ready
Redundant Power Supply
Battery Back-up option
Power Walk-in for Progressive Rectifier Start-up when the
Mains is Restored.
Static and Manual Bypass Operation
Advanced Communication Features
500 Real Time Event Log with Detailed Parameters
User Friendly Multilingual 320x240 Graphic Display Provides
Operation Information
Monitoring and Shutdown Software
RS232 Serial and RS485 Ports
Modbus RTU (Optional)
2 Communication Slots
Remote Emergency Power Off (Optional)
Remote Display Panel (Optional)
Dry Contact (Optional)
SNMP (Optional)
ProfiBUS (Optional)
Flexibility
3/1 Phase version is available for 10-30kVA power ratings Frequency converter mode.
Different IP protection degrees available as IP20, IP21, IP23, IP31, IP42, IP54, IP55, IP65
Isolation transformers to vary neutral connectivity in the event of separate power sources or for galvanic isolation between input and output.
Wide range of voltage options 110V, 120V, 208V, 220V, 230V, 240V, 380V, 400V, 440V, 480V, 690V
The aviation industry, the military, and other major industries rely on frequency converters for their dependable frequency switching capabilities. These devices make it easy to switch between 50hz, 60hz, and 400hz. But beyond the immediate benefits, frequency converters offer significant long-term advantages that can empower your facility's growth and success.
