FEATURES
PowerAll - All-in-One Home Energy Storage
Ensmart PowerAll series All-in-One residential energy storage solution allows you to manage solar generation use at ,your home, increase your savings and get additional backup power in case of a blackout.
PowerAll Residential All in One ESS refers to the integration of inverters, storage battery groups and other energy storage components to implement a Back up Power UPS for residential loads that combines renewable energy and implements load shifting to improve power quality and brings economical benefits such as reducing the electricity bills.
PowerAll 3-5kW | 5.1~20kWh is an All in One energy storage solution that combines a single phase Inverter + battery Storage and suitable for AC-Coupled, DC Coupled and Retrofit Applications, can pair with up to four 5.1kWh built-in battery for an extended storage capacity up to 20kWh.
Safe: Safest and highest performance CATL LFP battery cells; IP65 designed for outdoor installation; G98 and G99 UK Grid Certified
Flexible Configuration with 3.68 kW or 5 kW hybrid inverter and four additional battery packs 5.1kWh each up to 20kWh
AC-coupled For Retrofit Install
The EnSmart PowerAll ESS Solution can be connected without any solar PV present. This will ensure that the batteries remain charged from utility in case of unstable grid connection, or power outages.
The system will use the battery to power the essential loads. Also, for “Time of Use” customers, the system can be set up to charge the batteries when the cost of electricity is low, and use them when charges are high.
DC-coupled Solution :
Power produced from Solar Modules installed on the roof are harnessed by the EnSmart POWERALL 5 Inverter and used to charge the battery directly.
Once the batteries are fully charged the power from the modules will be used to power the general loads and essential loads. Where the Solar module power is not sufficient the balance of the power will be drawn from the battery to make up the difference.
Should the power from the Solar Modules and the battery not be enough the balance will then be drawn in from utility to service the loads. In case of power outages the POWERALL 5 will use power from the battery to power the essential load requirements.
Hybrid Coupled For Retrofit and PV Expansion:
The PowerALL ESS Solution can be added to any existing Solar PV system to function as a Back-up / UPS System. In this instance the EnSmart POWERALL5 Inverter will draw power from the existing Solar PV system to ensure that the batteries are fully charged. In case of power outages the EnSmart POWERALL will supply power from the batteries to the essential loads.
Ultra fast charging: 1.8 hours for 10.2 kWh (2 battery packs); 3.6 hours for 20.4 kWh (4 battery packs) – figures for the 5 kW inverter system charged by grid AC
Emergency Power Supply : Provides an uninterrupted backup power supply (4.6 kW) when the grid fails (automatic on/off gird switch in less than 6 ms)
Go fully off-grid: The system can be powered by just solar PV and no grid AC power is required
Simple: Modular and Plug & Play design; Installation can be carried out by a single installer in 2 hours
Highest performance warranty: 10,000-cycle and 10-year performance warranty guarantees at least 80% of the original capacity within the warranty period
Simple and Smart: Mobile and desktop apps for monitoring operating status, and analysing historical energy production & consumption.
