Partner Login
Partner Login

Smart BX-S-RM

Smart BX-S-RM
Smart BX-S-RM
CodePen - Social Media Icons Share

Smart BX-S-RM

10-15-20 kVA

Online UPS


Equipped with its new IGBT rectifier Smart BX -RM is designed for small data center and server rooms. With its rack-mounted design, Smart-BX-RM series keeps your critical loads protected while its space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR).
Thanks to the wide variety of accessories and options Smart BX series presents maximum flexibility advantage to users and optimizes total cost of ownership

 3/3 3/1 1/1 Phase convertible RackMounted
 IGBT PWM Rectifier & Inverter Technology
 Low Input Current THD (<3%)
 High Input Power Factor (>0.99)

Request Offer Find Distributor
 

Highlights



High Performance
Equipped with its new IGBT rectifier Smart BX series keeps your critical loads protected while its space-saving compact design and front access for maintenance successfully reduce mean time to repair (MTTR).


Lowest Total Cost of Ownership
IGBT based power factor correction technology provides input power factor close to 1 (≥ 0,99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.


Maximum Availability
Parallel configuration up to 8 units per redundancy (N+1) and power increase. Loop connection helps the UPS system to continue the operation when the connection cable is inturrupted.


Flexibility
External battery cabinets for different sizes of batteries to provide extended runtimes.Different sizes of 10-40kVA cabinets for larger capacity of internal batteries when long autonomy times are required. 3/1 Phase version is available for 10-30kVA power ratings.
m
View

25-400 A
Isolation of UPS from Connected Loads for Maintenance with No Loss of Network Availability.
m
View

Converts Ups status and parameter to comply with Modbus RTU protocol..
m
View

Battery extention cabinets for all Three-Phase EnSmart UPS..
m
View

Provides isolated, dry contact signals that can indicate any failure of UPS..
m
View

Helps the user to monitor the operational status of the UPS from a distant place..

FEATURES

High Efficiency & Low Total Cost of Ownership
    IGBT based power factor correction technology provides input power factor close to 1 (≥ 0,99). The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost.
     Low input current total harmonic distortion (THDi) less than 3% helps to avoid the disturbance and expensive harmonic filters.
     Small footprint and easy maintenance.
High Input Power Factor 
0,99 Input power factor ensures clean and sinusoidal input current.
The high input power leads to reduced electricity pay-out, minimizes cable, switchboard, fuse and generator requirements, thus reducing investment cost

Maximum Availability
     Parallel configuration up to 8 units per redundancy (N+1) and power increase.
     Loop connection helps the UPS system to continue the operation when the connection cable is inturrupted.


Standard Electrical Features
     Backfeed Protection
     Cold Start (Optional)
     Advanced Battery Management
     Short Circuit and Overload Protection
     Parallel Ready
     Redundant Power Supply
     Power Walk-in for Progressive Rectifier Start-up when the
     Mains is Restored.
     Battery Temperature Sensor
     Static and Manual Bypass Operation
Advanced Communication Features
     500 Real Time Event Log with Detailed Parameters
     User Friendly Multilingual 320x240 Graphic Display Provides
     Operation Information
     Monitoring and Shutdown Software
     RS232 Serial and RS485 Ports
     Modbus RTU (Optional)
     2 Communication Slots
     Remote Emergency Power Off (Optional)
     Remote Display Panel (Optional)
     Dry Contact (Optional)
     SNMP (Optional)
     ProfiBUS (Optional)
Flexibility
     Temperature sensor for external battery cabinets for extended runtimes.
     External battery cabinets for different sizes of batteries to provide extended runtimes.
     Different sizes of 10-40kVA cabinets for larger capacity of internal batteries when long autonomy times are required.
     3/1 Phase version is available for 10-30kVA power ratings Frequency converter mode.
     Isolation transformers to vary neutral connectivity in the event of separate power sources or for galvanic isolation between input and output.
     Compatible version with EN 50171 for supplying power to emergency lighting systems.

MODEL Smart BX-S-RM 10 kVA
Capacity 10 kVA
Power Watt 9 kW
INPUT
Related Voltage 380 / 400 / 415 VAC, (3Ph+N+PE) -20% +15% 
Voltage Range 208 - 478 VAC 
Frequency 50 Hz: 45-55 Hz; 60 Hz: 54-66 Hz (Auto Sensing) 
Power Factor ≥0,99 
Bypass Frequency Range 50-60 Hz ±10% 
Harmonic Distortion Max. Voltage: 220V: +25% (Optional +10%, +15%, +20%), 230V: +20% (Optional +10%, +15%), 240V: +15% (Optional +10%)
Min. Voltage: -45% (Optional -20%, -30%) 
Generator Compatible 
OUTPUT
Voltage Range 380V / 400V / 415 VAC (3Ph+N+PE) 
Power Factor 0.9 
Voltage Regulation ±1% 
Frequency (AC Mode) ±1%, ±2% , ±4%, ±5%, ±10% (Optional) 
Frequency (Battery Mode) 50-60 ± 0.1 Hz 
Waveform Pure Sinewave 
Crest Factor 3:1 
Harmonic Distortion ≤2% (Linear Load) ≤5% (Non-Linear Load) 
Transfer Time Battery Mode to Inverter Mode 0ms, Inverter to Bypass Mode 0ms 
Output Dynamic Tolerance At 100% Load ±5% 
Overload (AC Mode) ≤110%: 60min.; ≤125%: 10min.; ≤150%: 1min. ≥150% turn to Bypass Mode Immediately 
Overload (Battery Mode) >150% Bypass Mode 
Parallel Operation Optional 
EFFICIENCY
AC Mode 93,5% 
Battery Mode 92,5% 
ECO Mode 98% 
BATTERY
DC Voltage 240-480 VDC 
Battery Quantity (20-40) x 12V 7/9Ah 
Charge Current 5A 
Typical Recharge Time 8 Hour 
PROTECTION
Full Protection Overload, Short Circuit ve Battery Charge-Discharge Protection, RFI/EMI Filtre, IP20 
SYSTEM FEATURES
Charge Current Smart Charging System 
Over-Temperature Line Mode: Turn to Bypass; Backup Mode: Shut Down UPS Immediately 
Intelligent Alarm System Line Failure, Low Battery, Overload, System Failure 
LED&LCD Monitor Line Mode, Battery Mode, Bypass Mode, Battery Low, Overload & UPS Fault 
ALARMS
Utility Failure Line Mode, Low Battery, Overload, System Fault 
Battery Low Alarm and Shut Down 
Overload Overload 
UPS Fault System Fault 
ENVIRONMENTAL
Operation Temperature 0°C~40°C 
Storage Temperature -25°C~55°C 
Humidity 0%~90% 
Altitude <1500 m 
Noise Level <50 dB 
COMMUNICATION
Communication Interface USB, RS232, RS485, Parallel Port, Dry Contact, Smart Port, SNMP Card (Optional), Relay Card (Optional) 
Software Muser4000, Sofeware 
Emergency Power Off Dry Contact (Optional) 
STANDARDS
Safety IEC/EN62040-1, IEC/EN60950-1 
EMC IEC/EN62040-2, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 
DIMENSIONS &WEIGHT
Dimensions WxDxH (mm) 440 x 575 x 135 mm
Net Weight (kg) - kg
Product Data Sheet
Smart BX-S-RM 10-15-20 kVA
 EN   RU   UA 
 

Gallery  ONLINE UPS

Everything new

Related Blog Posts

Successful Newsletter subscription successful!
Unsuccessful Email address is incorrect!
Warning Email address subscription exists!
×

Request Offer

Send Us a Message

I have read and agree to the privacy policy.

I would like to receive further information about new products in the future.